1600-A02 - Aquttaup Aqquserna
Location – town/settlement
Mixed residential areas
The area is to be used for residential purposes with open-low residential buildings in the shape of detached single-family houses, dense-low residential buildings such as terraced houses etc. as well as residential multi-storey buildings
The area covers an area of some 7 ha
New buildings are to have a maximum height of two storeys.
Remaining available space
The area is fully developed without any available space
Traffic service and utilities
Road access to the area is to be from Amutsiviup Aqquserna, Aquttup Aqquserna, Aqqusinertaaq and Tatsip Aqquserna
Listed, protected and preservation-worthy features
B-17, B-21 and B-28 are preservation-worthy. These buildings can only be demolished or their appearances changed following prior permission by the municipal council.
Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway. The area is located under the obstacle limitation surface at the airport and is covered by approach and take-off surfaces. The maximum ridge level of buildings and facilities and the construction level of roads are variable and depend on the distance to the runway and a right-angled distance from the centre line. The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 171.0 metres and roads no higher than level 166.0 metres.
Open spaces are to be set up as public leisure areas or remain unspoiled