1504-B01 - Port

1504-B01 (en)

static-map
Loading map...
static-map
  • Location – town/settlement

    Saattut

  • Purpose

    Areas for industry and ports

  • Specific use

    Areas for industry and ports

  • Use

    The area is to be used for activities within office, contractors, industry, warehouses, skilled trade, workshop, production and transport as well as port purposes involving dock and pier facilities, terminal functions and similar port facilities. The offshore area may be used for anchoring and mooring

  • Current conditions

    The area covers an area of some 8 ha

  • Building provisions

    New buildings are to have a maximum height of 11 metres The necessary off shore areas may be filled in. When finished, the filled area must be level.

  • Remaining available space

    Some new commercial buildings can be built on the basis of a concrete assessment. Based on a concrete assessment, it is possible to add to existing buildings.

  • Traffic service and utilities

    From the area, access is to be provided to the other areas and functions in the settlement by means of the existing system of wheel tracks and paths

  • Listed, protected and preservation-worthy features

    No special provisions

  • Regulated zones

    The area is covered by the tank facility’s safety zone. The safety zone has a radius of 20 metres from the outer limit of the tank facility. This part of the area cannot be developed or in any other way be used contrary to the safety zone provisions. The area is located under the obstacle limitation surface at the heliport (overflight area and transition surface), where the maximum rigde height of buildings and facilities varies with a positive slope away from the start and landing area.

  • Special provisions

    No special provisions