Ilulissat

Areas for industry and ports

Industry areas

The area is to be used for activities within office, contractors, industry, warehouses, skilled trade, workshop, production and transport

The area covers an area of some 10 ha

New buildings are to have a maximum height of 12 metres

The area has 30,000 m² of available space, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area is considered fully developed without any available space in the area.

Road access to the area is to be from Qoororsup Aqquserna

No special provisions

The area is covered by the protection zone for the water catchment area. The protection zone runs 30 metres outside of the catchment area border. Constructing buildings and facilities or keeping dogs etc. within the protection zone is not permitted. Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway. The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 73.0 metres and roads no higher than level 68.0 metres.

Plots 2.1, 2.2, 2.3, 2.4, 2.5, 2.6, 2.7, 2.8, 2.9, 2.10, 2.11, 2.12. 2.13, 2.14 and 2.15 in detail area B8.2 cannot be put to use until the water protection zone has been cancelled