Ilulissat

Areas for industry and ports

Areas for industry and ports

The area is to be used for port purposes involving dock and pier facilities, terminal functions and similar port facilities. The offshore area may be used for anchoring and mooring

The area covers an area of some 8 ha

New buildings are to have a maximum height of 15 metres

The area has 3,000 m² of available space, depending on the final layout of the buildings. Once the abovementioned building potential has been utilised, the area is considered fully developed without any available space in the area.

Road access to the area is to be from Mittarfimmut Aqqut, Noah Mølgårdip Aqqutaa, Quikasik and Elias Jørgensenip Aqqutaa

No special provisions

The area is covered by the tank facility’s safety zone. The safety zone has a radius of 50 metres from the outer limit of the tank facility. This part of the area cannot be developed or in any other way be used contrary to the safety zone provisions. Regulated zones exist around the airport in the shape of obstacle limitation surfaces that consist of partly a horizontal surface and a conical surface, partly approach and take-off surfaces in continuation of the runway. The area is located under the obstacle limitation surface at the airport and is covered by approach and take-off surfaces. The maximum ridge level of buildings and facilities and the construction level of roads are variable and depend on the distance to the runway and a right-angled distance from the centre line. The area is located under the airport’s obstacle limitation surface, and is covered by the horizontal surface, where buildings and other facilities cannot be established higher than level 73.0 metres and roads no higher than level 68.0 metres.

High-lying mountain/hill sections at Mittarfimmut Aqqut are to remain unbuilt